Tac-m79 37mm Top Break Launcher GI Fiberglass (12″ or 14″)

Our 37mm launchers are NOT firearms. That means no firearm ammo—period. Do not use adapters to fire 12 gauge, centerfire, rimfire, or Beehive rounds through this launcher. That’s a fast track to wrecking the launcher, hurting yourself, and putting yourself on the wrong side of the rules.

Break this rule and you’re risking serious damage, personal injury, and potential ATF violations (BATF rules).  Oh—and the warranty instantly goes out the window.

Stay smart. Run the launcher the way it was designed, and review our Warranty, Legal, Privacy & Return Policy before sending anything downrange. 💥

See more information on the M79, here

The Tac-79 is a launcher that can be purchased in a variety of different configurations:

• TACTICALLY, WITH A COLLAPSIBLE AR STOCK

• CONVENIENTLY, AS A PISTOL WITH A 6" BARREL

• HISTORICALLY, WITH AN AUTHENTIC MIL-SURP M79 FIBERGLASS STOCK

The Tac-79 comes with one 4" Picatinny Rail mounted at the 12 o'clock position on the breech end of the barrel.

The basic specs of the Tac-79 are as follows:

Designation: Launcher, 37mm, Single Action, Exposed Hammer, Top Break

Country of Origin:  USA

Manufacturer: Ordnance Group,  Sarasota Florida USA

Caliber: 37/38mm (1.5”) Rimmed Ammunition

Barrel Length: 12” (30.5cm). Fully enclosed rim. Transverse pin lockup

Dimensions (Tactical configuration):

• Length 23 - 27in. (59 - 69cm)

• Height 9in (23cm)

• Weight 4lb 14oz (2.2kg)

 Nominal Trigger Pull: 1.5lbs (0.7kg)

Safety: Ambidextrous Hammer Block

Stock: Six Position Adjustable AR stock

Foregrip: Vertical, may vary from illustration

Pistol Grip: A2 AR compatible grip

Materials: 6061-T6 Aluminum. 4140 Steel. All materials sourced from the USA

Finishes: MIL-A-8625 Type II Anodizing and Mil-DTL-13924D Black Oxide

Picatinny Rails: One top 4” and 6” bottom standard (Mil-STD-1913).

Drilled and tapped to accept any AR compatible butt stock using only the buffer tube, castle nut and alignment plate. Buffer and Buffer Spring are not required.

The Tac-79 handles standard 37mm ammunition. Available ammunition includes flares, smoke and other pyrotechnic rounds for civilian use. If you are a member of law enforcement or the military you can have a variety of “Less Than Lethal” rounds at your disposal. These include Batons, CS Gas, Wildlife Management (Bird Control) and crowd dispersing Rubber Pellets. The Tac-79 is ideal for use by SWAT Teams and others with critical tactical requirements.

THIS IS THE NEWEST TAC-79 CONFIGURATION: THE TAC-M79FG

WE HAVE BEEN FORTUNATE TO FIND A DECENT SUPPLY OF AUTHENTIC, CA. 1970'S, FIBERGLAS STOCKS. WE HAVE MADE A CUSTOM MOUNT TO AFFIX THEM TO THE RECEIVER AND HAVE CUT THEM A BIT FOR PURPOSES OF FIT.  THESE STOCKS COME WITH THEIR ORIGINAL GI RUBBER BUTT PAD AND GI SLING SWIVEL.

WE NOW OFFER THIS LAUNCHER WITH A 14" BARREL.  CHOOSE FROM THE DROP DOWN.

WE HAVE MANUFACTURED A HIGH IMPACT, PHENOLITHIC FOREND TO WHICH WE HAVE ATTACHED ANOTHER GI SLING SWIVEL.

NOTE: SIGHT AND OTHER ACCESSORIES ARE NOT INCLUDED IN THE PRICE.

Designation: Launcher, 37mm, Single Action, Exposed Hammer, Top Break Country of Origin:  USA Manufacturer: Ordnance Group LLC,  Sarasota Florida USA Caliber: 37/38mm (1.5”) Rimmed Ammunition Barrel Length: 12"/14”. Fully enclosed rim. Transverse pin lockup Dimensions (Fiberglas stock):

• Length 29.5 in. (70cm)

• Height 5.5in (14cm)

• Weight 6lb 4oz (2.7kg)

 Nominal Trigger Pull: 1.5lbs (0.7kg) Safety: Ambidextrous Hammer Block Stock: GI Surplus Fiberglas with rubber butt pad and sling swivel Foregrip: Horizontal, phenolithic with sling swivel Pistol Grip: None Materials: 6061-T6 Aluminum. 4140 Steel. All materials sourced from the USA Finishes: MIL-A-8625 Type II Anodizing and Mil-DTL-13924D Black Oxide Picatinny Rails: One top 4” (Mil-STD-1913).